Comments for Hireko Golf Support http://support.hirekogolf.com Just another WordPress weblog Tue, 29 Nov 2011 16:29:43 +0000 hourly 1 http://wordpress.org/?v=3.2.1 Comment on Golf Club FAQ’s by Rob Altomonte http://support.hirekogolf.com/customer-support/golf-club-faqs/comment-page-1/#comment-8848 Rob Altomonte Tue, 29 Nov 2011 16:29:43 +0000 http://support.hirekogolf.com/?page_id=98#comment-8848 Greetings, We no longer have a distributor in Australia. You can order direct from Hireko in the United States. You can call us direct at 800-367-8912 and speak with customer service to place your order or order online at www.hirekogolf.com. Thank you! Rob Altomonte Hireko Golf Greetings,
We no longer have a distributor in Australia. You can order direct from Hireko in the United States. You can call us direct at 800-367-8912 and speak with customer service to place your order or order online at http://www.hirekogolf.com. Thank you!
Rob Altomonte
Hireko Golf

]]> Comment on Golf Club FAQ’s by dmac http://support.hirekogolf.com/customer-support/golf-club-faqs/comment-page-1/#comment-8762 dmac Sat, 26 Nov 2011 06:45:37 +0000 http://support.hirekogolf.com/?page_id=98#comment-8762 Hi, Do you still have a distributor in Australia? Executive Golf's website is down and there is no response to my attempts to contact them. I know it's not your fault, but that could be seen as a poor reflection on Hireko if you can't get hold of the distributor. Cheers, dmac. Hi,

Do you still have a distributor in Australia? Executive Golf’s website is down and there is no response to my attempts to contact them. I know it’s not your fault, but that could be seen as a poor reflection on Hireko if you can’t get hold of the distributor.

Cheers,

dmac.

]]> Comment on Dynamic Shaft Fitting Addendum by New 2012 UST-Mamiya Shafts & Grips! http://support.hirekogolf.com/customer-support/dynamic-shaft-fitting-addendum-download-free/comment-page-1/#comment-8557 New 2012 UST-Mamiya Shafts & Grips! Wed, 16 Nov 2011 17:01:58 +0000 http://support.hirekogolf.com/?page_id=140#comment-8557 [...] adapters and head to the range. Before I did, I made sure to measure the information for our annual Shaft Fitting Addendum as I do any shaft I get my hands on.  For all you fellow techies, take a look at the data below in [...] [...] adapters and head to the range. Before I did, I made sure to measure the information for our annual Shaft Fitting Addendum as I do any shaft I get my hands on.  For all you fellow techies, take a look at the data below in [...]

]]> Comment on Chairman Club Trade Discount Program by The Survey Says! http://support.hirekogolf.com/services/chairman-club-trade-discount-program/comment-page-1/#comment-8173 The Survey Says! Wed, 26 Oct 2011 19:37:10 +0000 http://support.hirekogolf.com/?page_id=58#comment-8173 [...] Trade Pricing Although we had several other ask a similar question, one of the responses was “I am a professional clubmaker, I would like a slight discount on products”.  Hireko does offer better pricing for trade accounts called the Chairmen’s Club.  To see if you qualify and would like to participate, here is the link. [...] [...] Trade Pricing Although we had several other ask a similar question, one of the responses was “I am a professional clubmaker, I would like a slight discount on products”.  Hireko does offer better pricing for trade accounts called the Chairmen’s Club.  To see if you qualify and would like to participate, here is the link. [...]

]]> Comment on About Hireko by John Scott http://support.hirekogolf.com/company-information/about-hireko/comment-page-1/#comment-7811 John Scott Tue, 04 Oct 2011 11:42:27 +0000 http://support.hirekogolf.com/?page_id=2#comment-7811 John Scott jscott2844@wi.rr.com John Scott
jscott2844@wi.rr.com

]]> Comment on About Hireko by John Scott http://support.hirekogolf.com/company-information/about-hireko/comment-page-1/#comment-7810 John Scott Tue, 04 Oct 2011 11:41:57 +0000 http://support.hirekogolf.com/?page_id=2#comment-7810 Rob, I wanted you to know that I will be completing a utube webcast for the hybrid golf swing. It will feature the use of the Hireko golf clubs that I have come to know through experimenting since 2003. I am the one with the four spinal issues at 61 years old (a boomer consideration in marketing) and using the Synchron 11 clubs and the wide-soled irons. The real unique feature of this 'golfblasters' swing for non-golfers is the suggested use of the 28 degree Synchron ONLY on the course. One can just keep the number they get on the hole and it is really suggesting a swing for those who golf once a year maybe in a business golf outing or just a few times with their friends. There may be a chance to work with Golf Galaxy here in the Midwest and they design clubs so purchasing the components could happen if this recreational approach to grow the game does find a marketplace. For your information I use the 28 degree 9 wood Only and score double-bogey, bogey, or par. I can reach most 380 yard par fours in three so I am pitch-putting with the 9 and that is where I run into double-bogeys. Maybe I should take along a putter. Oh well. We shall see. This is an attempt to get the non-golfing public into the golf picture at some level after hours for some recreational fun at the end of the day. Maybe I should eventually be wearing a Hireko Golf hat or shirt for direct promotions? just a thought. I can demonstrate why those work the most efficiently although I did see some others built from Pinemeadow Golf that were similar. I am sticking with Hireko for now. Keep in touch. Who can you call...golfblasters...that's who! I suppose you can guess where we are taking that from??? John Scott Rob, I wanted you to know that I will be completing a utube webcast for the hybrid golf swing. It will feature the use of the Hireko golf clubs that I have come to know through experimenting since 2003. I am the one with the four spinal issues at 61 years old (a boomer consideration in marketing) and using the Synchron 11 clubs and the wide-soled irons. The real unique feature of this ‘golfblasters’ swing for non-golfers is the suggested use of the 28 degree Synchron ONLY on the course. One can just keep the number they get on the hole and it is really suggesting a swing for those who golf once a year maybe in a business golf outing or just a few times with their friends. There may be a chance to work with Golf Galaxy here in the Midwest and they design clubs so purchasing the components could happen if this recreational approach to grow the game does find a marketplace. For your information I use the 28 degree 9 wood Only and score double-bogey, bogey, or par. I can reach most 380 yard par fours in three so I am pitch-putting with the 9 and that is where I run into double-bogeys. Maybe I should take along a putter. Oh well. We shall see. This is an attempt to get the non-golfing public into the golf picture at some level after hours for some recreational fun at the end of the day. Maybe I should eventually be wearing a Hireko Golf hat or shirt for direct promotions? just a thought. I can demonstrate why those work the most efficiently although I did see some others built from Pinemeadow Golf that were similar. I am sticking with Hireko for now. Keep in touch. Who can you call…golfblasters…that’s who! I suppose you can guess where we are taking that from??? John Scott

]]> Comment on About Hireko by Rob Altomonte http://support.hirekogolf.com/company-information/about-hireko/comment-page-1/#comment-7802 Rob Altomonte Mon, 03 Oct 2011 18:39:46 +0000 http://support.hirekogolf.com/?page_id=2#comment-7802 What would you like to know? Rob Altomonte Hireko Golf What would you like to know?
Rob Altomonte
Hireko Golf

]]> Comment on About Hireko by Linos http://support.hirekogolf.com/company-information/about-hireko/comment-page-1/#comment-7799 Linos Mon, 03 Oct 2011 15:45:20 +0000 http://support.hirekogolf.com/?page_id=2#comment-7799 It is so nice and great website to me, I will like to try buite some small business about clubmaker in China, and let me get more info. learn how it is . Thanks a lot. It is so nice and great website to me, I will like to try buite some small business about clubmaker in China, and let me get more info. learn how it is . Thanks a lot.

]]> Comment on Dynamic Shaft Fitting Addendum by What Makes The KBS C-Taper So Special? http://support.hirekogolf.com/customer-support/dynamic-shaft-fitting-addendum-download-free/comment-page-1/#comment-7554 What Makes The KBS C-Taper So Special? Mon, 19 Sep 2011 21:15:44 +0000 http://support.hirekogolf.com/?page_id=140#comment-7554 [...] is the DSFI data that we produce for our annual Shaft Fitting Addendum so you can compare them to other shafts we have [...] [...] is the DSFI data that we produce for our annual Shaft Fitting Addendum so you can compare them to other shafts we have [...]

]]> Comment on Dynamic Shaft Fitting Addendum by Aldila’s R.I.P. Shaft Additions http://support.hirekogolf.com/customer-support/dynamic-shaft-fitting-addendum-download-free/comment-page-1/#comment-7425 Aldila’s R.I.P. Shaft Additions Mon, 12 Sep 2011 21:27:46 +0000 http://support.hirekogolf.com/?page_id=140#comment-7425 [...] heads and head to the range. Before I did, I made sure to measure the information for our annual Shaft Fitting Addendum as I do any shaft I get my hands [...] [...] heads and head to the range. Before I did, I made sure to measure the information for our annual Shaft Fitting Addendum as I do any shaft I get my hands [...]

]]>